210
2
Press [Crop], turning it on.
3
Set the following parameters.
Signs of numeric settings
For H, V, and All settings, it is not necessary to enter
the sign (+/–). For example, in the case of an H setting,
the value for Left is automatically converted to a
negative value, and the value for Right to a positive
value, to display the image. The following shows
example input settings.
4
To soften the edges of the image, press [Edge Soft],
turning it on, and set the following parameter.
Edges of an image cannot be softened when cropping
is disabled.
To select whether to also invert the crop area
when inverting the video image
In the <Invert/Crop Process> group, select one of the
following.
Crop −>Invert: Set an axis of symmetry at the center of
the input video, and invert both the desired area of
video and the crop area horizontally and vertically
around that axis of symmetry. The order of effect
application for the input image is Crop and then Invert.
Invert −>Crop: Sets an axis of symmetry at the center of
the input video, and inverts only the image
horizontally and vertically around that axis of
symmetry, depending on the invert settings. The order
of effect application is Invert and then Crop.
Beveled Edge Settings
Applying a beveled edge
1
Open the DME >Edge >Beveled Edge menu (4112).
2
Press [Beveled Edge], turning it on.
3
Set the following parameters.
4
In the <Edge Mode> group, select the type of edge.
Light: Effect of light striking the edge.
When [Light] is selected, set the following parameters.
Color: Colored edges.
When [Color] is selected, select the item to adjust in
the <Color Adjust> group and set the following
parameters.
• To set the density
• To set the colors for each edge (Top, Left, Right,
Bottom, All)
5
To soften the inside edges and the boundaries between
adjacent edges, press [Edge Soft], turning it on, and set
the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 H Crop level on left and right sides
2 V Crop level on top and bottom sides
3 All Crop level on all sides
Parameter group [2/2]
No. Parameter Adjustment
1 Top Position of top crop
2 Left Position of left crop
3 Right Position of right crop
4 Bottom Position of bottom crop
Parameter Input Setting
H 1.5 Left=–1.50
Right=1.50
–1.5 Left=–1.50
Right=1.50
No. Parameter Adjustment
1 Soft Edge softness
Note
No. Parameter Adjustment
1 H Simultaneously adjust width of left
and right edges
2 V Simultaneously adjust width of top
and bottom edges
3 All Simultaneously adjust width of all
four edges
No. Parameter Adjustment
1 Top Adjust luminance of top edge
2 Left Adjust luminance of left edge
3 Right Adjust luminance of right edge
4 Bottom Adjust luminance of bottom edge
5 All Simultaneously adjust luminance of
all four edges
No. Parameter Adjustment
1 Density Adjust the color density
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3Hue Hue
To Next Page
Loading...
Need help?
General
