59
Shutting Down the Switcher System
Before turning the switcher system off, shut down the
switcher control station and menu using the following
procedure.
If the switcher system is configured with several switchers
and control panels, shutting down the switcher control
station will cause all switchers and control panels to not
operate correctly.
1
Press [System Shutdown] in the top menu list.
2
Check the message, then press [Yes].
The switcher control station and menu are shut down
in that order.
When menu shutdown is completed, the menu screen
display turns off.
Note
To Next Page
Loading...
Need help?
General
