Sony XVS Series User Manual

290
The display in the numeric keypad control block
shows the current keyframe number and the indication
“TO.”
5 Using the numeric keypad in the numeric keypad
control block, carry out the following operations.
• To set the first keyframe in the range to be modified,
press the [CLR] button, then enter the keyframe
number using the numeric keypad buttons, and press
the [ENTER] button to confirm.
• To set the last keyframe in the range to be modified,
enter the keyframe number using the numeric
keypad, and press the [ENTER] button to confirm.
6 Press the [MOD] button, or press the [MOD] button
while pressing the [SHIFT] button.
For the difference in the result, see “Differences in the
changes when a number of keyframes are modified”
(page 290).
Differences in the changes when a number
of keyframes are modified
When you select a number of keyframes to modify, and
press the [MOD] button alone or in combination with the
[SHIFT] button, the result of the operation differs as
shown below.
Modifying the keyframes by pressing the [MOD]
button alone
The modified parameter values are taken as absolute
values, and applied to all of the selected keyframes.
Result:
The horizontal position of background B in keyframes 1
and 3 is now the same as that in keyframe 2.
In all keyframes, the vertical position remains unchanged
as the parameter is not changed.
Modifying the keyframes by holding down the
[SHIFT] button and pressing the [MOD] button
The modified parameter values are taken as relative
values, which modify all of the selected keyframes.
Result:
Background B of keyframes 1 and 3 is moved in the
horizontal direction by the same amount as in keyframe 2.
Deleting Keyframes
1 Press the [KF MCRO EDIT] button, then press the
[EDIT ENBL] button, turning it on orange.
2 Stop the effect at the desired edit point.
When the edit point is on a keyframe, this is what you
delete. If the edit point is between two keyframes, the
previous keyframe is what you delete.
3 To delete a number of keyframes in a single operation,
press the [FROM TO] button or the [ALL] button.
If you press the [FROM TO] button, specify the
keyframe range.
For details about specifying a range, see “Modifying
more than one keyframe simultaneously” (page 289).
4 Press the [DEL] button.
This deletes the keyframe.
Deleting a keyframe reduces the total duration of the
effect.
In constant duration mode (see page 277), however,
the duration does not change.
For details, see “Changes in the effect duration
caused by deleting a keyframe” (page 278).
Keyframe 1 Effect
execution
Keyframe 2
Modify keyframe 2.
(Changing the position of
background B in the horizontal
direction)
Select keyframes 1 to 3 and
modify simultaneously.
: Background A
: Background B
Keyframe 3
Effect
execution
Keyframe 1 Keyframe 2 Keyframe 3
Modify keyframe 2.
(Changing the position of
background B in the horizontal
direction)
Select keyframes 1 to 3 and
modify simultaneously.
: Background A
: Background B
Keyframe 1 Effect
execution
Keyframe 2 Keyframe 3
Keyframe 1 Effect
execution
Keyframe 2 Keyframe 3

Sony XVS Series Specifications

General

Brand	Sony
Model	XVS Series
Category	Switch
Language	English