323
Shotbox Execution
You can execute a shotbox using the numeric keypad
control block, Flexi Pad control block, utility/shotbox
control block, or cross-point control block.
Shotbox Execution (Numeric Keypad
Control Block)
Numeric keypad control block
1
In the numeric keypad control block, press the
[SHOTBOX] button.
The control block switches to shotbox operation mode,
and the [SHOTBOX] button and [RCALL] button
light amber.
The display shows the last recalled register number.
2
Enter the register number to recall using the numeric
keypad buttons.
For details about selecting a register, see “Register
selection in the numeric keypad control block”
(page 285).
3
Press the [ENTER] button.
The selected shotbox register is executed.
If auto run is set, the effects are executed at the same
time they are recalled.
The region selection buttons corresponding to the
regions for which effects are set turn on.
When auto run is not set for the recalled register
Simply recalling the register does not execute the
effects. Press the [RUN] button in the utility/shotbox
control block to execute the effects.
Shotbox Execution (Flexi Pad
Control Block)
Flexi Pad control block
1
In the Flexi Pad control block, press the [SHOTBOX]
button.
The memory recall section switches to shotbox
operation mode.
The last recalled bank is displayed.
2
Select the target bank for operation using the bank
selection buttons.
In the shotbox, select from bank 0 to 9 (register
number 1 to 99).
For details about bank selection, see “Bank and
register selection in the Flexi Pad control block”
(page 312).
3
Press the button for the register you want to execute.
The selected button lights orange, and the shotbox
register is executed. The selected bank and register
number are displayed on the top right button in the
memory recall section.
SHOTBOX button
Numeric keypad buttons
Display
RCALL button
Region selection buttons
SHOTBOX button
Memory recall section
Bank selection buttons
To Next Page
Loading...
Need help?
General
