64
MKS-X7011 Menu Panel
Bottom view
a DC IN connector
Connect to the 12 V DC output of the supplied AC adaptor.
b U (signal ground) terminal
Connect to the system ground.
c LAN connector (RJ-45, PoE+, 1000BASE-T
compliant)
Connect to a switcher control station via an Ethernet
switch. The unit can operate without using an AC adaptor
if connected to a PoE+ (Power over Ethernet Plus)
compatible Ethernet switch.
1)
1) For details about supported PoE+ compatible Ethernet switches, contact
your Sony service or sales representative.
Side view
DEVICE connector (USB 2.0 compliant, USB Type A)
Connect to a USB flash drive. Used for installing software,
importing/exporting files, etc.
c LAN connector
b U terminal
a DC IN connector
DEVICE connector
To Next Page
Loading...
Need help?
General
