Tait TM9100 Service Manual

16 Introduction TM9100 Service Manual
© Tait Electronics Limited August 2005
1.4 Product Codes
This section describes the product codes used to identify products of the
TM9100 mobile radio product line.
General The product codes of the TM9100 mobile radio product line have the
format:
TMAabc–ddee
where:
■ a identifies the product category:
A=accessory, B=radio body, C=control head, S=software feature
■ b, c, dd and ee identify specific product features.
Radio Bodies The product codes of the radio bodies have the format:
TMAB3c–ddee
where:
■ 3 identifies the architecture of the digital board:
3=APCO digital
1 and 2 identify the digital boards of the analog TM8000 product line.
■ c identifies the RF output power:
2=25W, 4=30 to 59W, 5=30 to 59W (trigger-base)
■ dd identifies the frequency band:
B1=136 to 174MHz, H5=400 to 470MHz, H6=450 to 530MHz,
H7=450 to 520MHz
Other characters identify frequency bands of the analog TM8000
product line.
■ ee identifies any radio options:
00=BNC RF connector, 01=mini-UHF RF connector
Control Head The product code of the control head has the format:
TMAC41–dd
where:
■ 4 identifies the control-head type (4=graphical-display control head)
Other numbers identify control heads of the analog TM8000 product
line.
■ 1 identifies the control-head configuration (1=APCO digital)
0 identifies the control-head configuration of the analog TM8000
product line.
■ dd identifies label and branding options.

Tait TM9100 Specifications

General

Brand	Tait
Model	TM9100
Category	Radio
Language	English