Tait TM9100 Service Manual

44 Description TM9100 Service Manual
© Tait Electronics Limited August 2005
2.4.2 Software Architecture
Overview Software plays an important role in the functioning of the radio. Some radio
functions such as the graphical user interface, processing of the analog and
digital signals, and the implementation of analog and digital radio
applications are completely implemented by software.
For a block diagram of the software architecture, refer to Figure 2.11 on
page 45.
Software Modules The following software modules are stored on the digital board of the main
board:
■ FPGA image, which includes the software-implemented RISC processor
and the custom logic (the custom logic executes additional digital signal
processing)
■ boot code
■ radio application code
■ digital signal processing
■ radio application database and radio calibration database
The following software modules are stored on the control-head board with:
■ FPGA image, which includes the software-implemented RISC processor
■ boot code
■ control-head application code
■ control-head application database
Hardware and interface drivers are part of the boot code, the RISC code,
and—in case of the main board—the DSP code.

Tait TM9100 Specifications

General

Brand	Tait
Model	TM9100
Category	Radio
Language	English