Naming or Renaming a Stored Program
You can use up to 18 characters in a Stored Program name.
1. Press the MMaacchhiinnee SSttaattuuss button.
2. Touch the TToooollss tab, then touchSSttoorreedd PPrrooggrraammmmiinngg.
3. Touch EEnntteerr // CChhaannggee NNaammee.
4. Select the stored program that you want to rename.
Note: To return to the previous screen or to advance to the next screen, touch the up and down arrows.
5. Type the new name for the stored program, then touch SSaavvee.
6. Touch CClloossee.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 149
Stored Programming
To Next Page
Loading...
Need help?
General