• Operates at rated print engine speed for most paper sizes
• Quick-change die sets that can be interchanged without any tools
• All die sets include an identification label that provides users with the hole pattern and name
• Convenient storage area for two extra die sets adjacent to the Punch Chip Container
For detailed information and instructions for using the GBC
®
AdvancedPunch
™
Pro, refer to the guide on the
customer documentation disk that shipped with the device, or go to www.xerox.com and in the SSeeaarrcchh box, type
GBC AdvancedPunch Pro.
High Capacity Stacker
The High Capacity Stacker is an optional finishing device that provides large-capacity stacking and offsetting
capabilities for production output to a stacker tray and cart. The stacker provides a top tray that is convenient for
short stack runs.
Note: The High Capacity Stacker requires the Interface Decurler Module.
Crease and Two-Sided Trimmer
The Crease and Two-Sided Trimmer provides crease capabilities and trimming on two sides of the output.
The Crease and Two-Sided Trimmer trims the top and bottom of sheets or booklets to produce full bleed output.
When this device is combined with the SquareFold
®
Trimmer Module, all sides of booklets can be trimmed, except
the binding. This enables the creation of full bleed booklets. For more information, refer to SquareFold
®
Trimmer
Module
This optional finishing device requires one of the following Production Ready Finishers:
• Production Ready Finisher
• Production Ready Booklet Maker Finisher
• Production Ready Finisher Plus
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 39
Getting Started
To Next Page
Loading...
Need help?
General