a. Push up lever 11cc.
b. Carefully remove the jammed paper.
5. Return lever 11cc to the original position.
6. Close the IDM front cover.
7. If necessary, to clear paper jams from other areas of the printer, follow the instructions on the printer control
panel.
ERROR MESSAGES ON THE INTERFACE DECURLER MODULE
When faults occur, such as paper jams, open doors or covers, or printer malfunctions, the printer stops printing, then
a message appears on the decurler module control panel. The control panel message includes an illustration that
shows the location of the fault, and corrective actions for clearing the fault. If a fault occurs in more than one
location, the illustration changes to indicate the multiple locations and the required corrective actions.
Fault Code Information on the Interface Decurler Module
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing, and
a message appears on the printer control panel touch screen.
The touch screen displays a Faults button that provides information about the fault and detailed instructions for
correcting the fault.
Note: Interface Decurler Module faults start with the three-digit number 048.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 341
Interface Decurler Modules
To Next Page
Loading...
Need help?
General