ABB PGC2000 User Manual

2000-OSM, F1 4-20
4. On the second Print Tables screen, enter the Method Table number and then press the F2 (Print
Selected Table) soft key. The Method Table and Component Table will print (see Figure 4-19).
METHOD TABLE #01 8:25:29 Fri 30 Sep 1994
Cycle Time = 00140
TIME FUNCTION VALUE
0001 Noise Calc On
0003 Noise Calc Off
0004 Auto Zero N/A
0005 Stream Step N/A
0010 Temp Check One
0015 Slope Detect On Now
0016 Pres Check One
0017 Valve On One
0019 Valve Off One
0028 Component One
0037 Valve On Two
0039 Valve Off Two
0048 Component Two
0049 Pres Control One
0057 Valve On One
0059 Valve Off One
0062 Temp Control Two
0068 Component Three
0077 Valve On Two
0079 Valve Off Two
0088 Component Four
0097 Valve On One
0099 Valve Off One
0108 Component Five
0138 Slope Detect Off Now
0139 Component Six
0139 Component Seven
0139 Component Eight
0139 Component Nine
METHOD TABLE #01 8:25:57 Fri 30 Sep 1994
NAME RRT W KEY LL HL RF CC
METHANE 28.00 5.0 Y 0.00 100. 30.673 95.00 %
ETHANE 48.00 5.0 N 0.00 100. 0.50051 0.9689 %
ETHYLENE 68.00 5.0 N 0.00 100. 0.16836 0.5210 %
H2 88.00 5.0 N 0.00 100. 1.7311 3.351 %
CO 108.0 5.0 N 0.00 100. 0.051707 0.1599 %
Z 139.0 5.0 N 0.00 100. 1.0000 0.0000 Clc
REAL HEAT 139.0 5.0 N 0.00 50000. 1.0000 100.0 Clc
SORT OF B 139.0 5.0 N 0.00 100. 1.0000 100.0 Clc
IDEAL HEAT 139.0 5.0 N 0.00 9000. 1.0000 100.0 Clc
Figure 4-19. PRINTED METHOD TABLE
5. When all the data have printed, press the F1 soft key as necessary to return to the Background
screen.
PEAK DETECTION
The analyzer measures peaks in two different ways: forced gating and slope detection. Both
methods can exist in the same analysis, but they cannot both measure peaks at the same time. If the

ABB PGC2000 Specifications

General

Brand	ABB
Model	PGC2000
Category	Laboratory Equipment
Language	English