4-31 2000-OSM, F1
Time Table
This table contains the schedules for automatic calibrations, benchmarks and stream analyses (see
Figure 4-30). The Time Table lists information by the day of the month and time of day (using a 24-
hour clock). If you enter “00” as the day, hour, or minute, the specified event will occur every day,
hour, or minute.
****** Time Table ******
Day Hour Minute Function Value
01 01 01 Cal Method 01
01 01 12 Cal Method 08
01 02 00 Bench Method 01
01 03 00 Bench Method 08
01 04 00 Anal Stream 01
01 04 30 Anal Stream 02
01 05 03 Valve On 01
01 05 09 Valve Off 01
More Below
Insert Delete
Exit Line Line
F1 F2 F3 F4
Figure 4-30. TIME TABLE SCREEN
To prepare or edit a Time Table:
1. On the Background screen, press the F1 (Exit To Commands) soft key.
2. On the Commands screen, cursor to TABLE EDIT and then press the F3 (Other Tables) soft key.
3. On the Edit Other Tables screen, cursor to TIME TABLE and then press the F2 (Edit the Table)
soft key.
4. On the Time Table screen, cursor to the desired line and edit the table as described in steps 6
through 10, as necessary.
5. If there are no entries in the Time Table, press the F2 (Insert Line) soft key.
6. Use the up and down cursor arrow keys to set the desired day.
7. Cursor right one column and set the desired hour with the up and down cursor arrow keys.
8. Cursor right one column and set the desired minute with the up and down cursor arrow keys.
9. Cursor right one column and select a function using the up and down cursor arrow keys. The
available selections are:
Cal Method Valve On Report Freq
Bench Method Valve Off Vista Basic
Anal Stream
To Next Page
Loading...
Need help?
General
