EasyManuals Logo
Home>ABB>Laboratory Equipment>PGC2000

ABB PGC2000 User Manual

ABB PGC2000
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #326 background imageLoading...
Page #326 background image
8-72 2000-OSM, F1
DUAL AIR CLEANUP REPAIR
The Dual Air Cleanup Assembly appears in analyzers having two detectors. Refer to Figure 8-47 for
Dual Air Cleanup Assembly component location.
4213
Harness
Assembly
Air Cleanup
Tube #1
Air Cleanup
Tube #2
Figure 8-47. DUAL AIR CLEANUP ASSEMBLY
CAUTION
It is the customer’s responsibility to ensure that the area is safe and and hazard-
free, and will remain so the entire time the analyzer is open. This responsibility
includes ensuring adequate ventilation in analyzer shelter and obtaining proper
work permits, etc.
See “AIR PURGING” in Section 4 for the X Purge override function. Do not perform
override until you have read Section 4 completely and you understand and can
perform the procedure properly.
Let the Dual Air Cleanup Assembly cool a minimum of 30 minutes prior to
disassembly. Internal surface temperatures can cause severe burns if they are
touched before they have cooled.
No asbestos is used in any assembly or component part of the Dual Air Cleanup
Assembly. Therefore, all residual insulating materials may be disposed of without
regulator restrictions.
The high temperatures present under normal operating conditions can cause
wiring insulation to become brittle and fragile.
Ceramic temperature probes should always be considered fragile. When servicing
the Dual Air Cleanup Assembly, these component parts must be handled with
great care to avoid damage.
Removing the Dual Air Cleanup Assembly
1. Remove power from the analyzer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB PGC2000 and is the answer not in the manual?

ABB PGC2000 Specifications

General IconGeneral
BrandABB
ModelPGC2000
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals