Rockwell Automation Publication 1444-UM001D-EN-P - June 2018 49
Install the Dynamix 1444 Series Monitoring System Chapter 2
Wiring Overview
General Module Connector Arrangements
The 1444 series requires that wiring is routed to both above and below the
modules. So particular attention and planning of cabinet wire routing is
essential for an efficient, well-organized, and therefore maintainable, cabinet.
Use Figure 7
when planning wire routing for the cabinet. Figure 7 provides an
overview of the locations of the connectors that are associated with the
significant function of each module.
Figure 7 - General Module
To Next Page
Loading...
Need help?
General