21.7
Removing clutch housing
•
Secure retaining fixture?(1), BMW No. 11 2 800,
as shown.
•
Release hexagon nut (2).
•
Remove thrust ring (3) with pliers.
•
Move clutch housing to and fro until O-ring (4) is
visible.
•
Cut through O-ring.
•
Pull off clutch housing.
L Note:
Do not lose thrust washer (5).
e Caution:
If clutch housing is difficult to move, use three-point
puller,
BMW No. 33 1 830, and pressure tool.
Do not damage bushing for thrust bearing!
11 2 800
LT210030
4
2
3
1
LT210040
5
To Next Page
Loading...
Need help?
General
