BMW K 1100 LT/RS User Manual

11.38
Installing crankshaft
•
Oil the bearings lightly before inserting the crank-
shaft.
•
Install the corresponding bearing caps with the
grooves aligned.
L Note:
Bearing caps 1…3 are marked for identification;
bearing caps 4 (thrust bearing) and 5 are not
marked.
•
Tighten the bearings in the order shown, starting
from the centre and working outwards.
X Tightening torque:
Main bearings .............................................. 50 Nm
3
5
1
2
4
LT110580

BMW K 1100 LT/RS Specifications

General

Brand	BMW
Model	K 1100 LT/RS
Category	Motorcycle
Language	English