12.11
Disassembling and assembling
alternator
Alternator
[only LT up to 1992 model year]
•
Remove damper elements (1)
•
Remove coupling housing (2) with holding tool
(3), BMW No. 12 4 600.
•
Pull off fan wheel (4).
•
Remove key (5).
•
Release retaining screw (6) for bearing end plate.
•
Clamp alternator in vice with jaw guards.
•
Remove bearing end plate (7) with three-point
puller, BMW No. 33 1 830.
X Tightening torque:
Coupling housing...........................................50 Nm
LT120080
5
7
6
4
2
1
12 4 600
LT120090
2
3
To Next Page
Loading...
Need help?
General
