Cisco ASR 1000 Series Software Configuration Guide

encapsulation aal5snap
service-policy input Leased_Line_Ingress
max-reserved-bandwidth 100
PVC Ranges on a Multipoint Subinterface for PPPoEoA Configuration Example
Multipoint subinterfaces, PVC ranges, and PPPoEoA support is introduced for the Cisco ASR 1000 Series
Aggregation Services Routers in Cisco IOS XE Release 2.5.
Note
interface atm0/0/0.65000 multipoint
range pvc 1/32 1/4031
protocol pppoe group bba_group1
pvc-in-range 1/32
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/33
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/34
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/35
class-vc pvcr_bba_vc_class
!
pvc-in-range 1/36
class-vc pvcr_bba_vc_class
!
AToM VP Cell Mode Relay Configuration Example
pseudowire-class vp-cell-relay
encapsulation mpls
exit
interface atm 1/2/0.1 multipoint
atm pvp 1 l2transport
xconnect 10.0.0.1 123 pw-class vp-cell-relay
PPPoEoA VC Class and PVC Range Configuration Example
bba-group pppoe bba_group1
virtual-template 1
!
vpdn enable
no vpdn logging
!
no virtual-template snmp
!
bba-group pppoe bba_group1
virtual-template 1
sessions per-mac limit 4000
!
vc-class atm pvcr_bba_vc_class
protocol pppoe group bba_group1
create on-demand
idle-timeout 30
vbr-nrt 1000 1000 1
!
interface atm0/0/0
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 89
Configuring the ATM SPAs
PVC Ranges on a Multipoint Subinterface for PPPoEoA Configuration Example

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English