Cisco ASR 1000 Series Software Configuration Guide

ModificationRelease
The following SPA support was introduced on the
Cisco ASR 1000 Series Aggregation Services Routers
in Cisco IOS XE Release 2.5S:
•
1-Port Clear Channel OC-12 ATM SPA
The following new feature support was introduced
for the ATM SPAs in Cisco IOS XE Release 2.5S:
•
Access Node Control Protocol (ANCP)
•
ATM Multipoint Subinterfaces
•
ATM PVC Ranges
•
CISCO-PPPOE-MIB
•
Local Template-Based ATM PVC Provisioning
•
Point-to-Point Protocol Over Ethernet Over
ATM (PPPoEoA)
•
PPPoE Connection Throttling
In addition to the Configuring the ATM SPAs chapter
in this guide, see the following link for a list of new
features in Cisco IOS XE Release 2.5: http://
www.cisco.com/c/en/us/support/ios-nx-os-software/
ios-xe-release-2/products-feature-guides-list.html.
Cisco IOS XE Release 2.5S
Initial release for the 1-Port Clear Channel OC-3
ATM SPA and 3-Port Clear Channel OC-3 ATM SPA
for Cisco Aggregation Services Router 1000 Series.
Cisco IOS XE Release 2.3S
Supported Features
This section provides a list of some of the primary features supported by the ATM hardware and software:
Basic Features
•
Bellcore GR-253-CORE SONET/SDH compliance (ITU-T G.707, G.783, G.957, G.958)
•
Interface-compatible with other Cisco ATM adapters
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
48 OL-14127-17
Overview of the ATM SPAs
Supported Features

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English