Cisco ASR 1000 Series Software Configuration Guide

CHAPTER 4
Configuring the SIP
This chapter provides information about configuring the SIP on the router.
•
Configuration Tasks, page 31
•
Resetting a SIP, page 34
Configuration Tasks
This section describes how to configure the SIP. For information about managing your system images and
configuration files, refer to the following:
•
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
•
Cisco IOS Configuration Fundamentals Configuration Guide
•
Cisco IOS Configuration Fundamentals Command Reference
Some Cisco IOS XE software features supported on the router are also upported on the SIPs. Use this chapter
along with the list of features supported on the SIPs as described in the Overview of the SIP chapter.
When referring to a router-specific documentation, ensure to note any SIP-specific configuration guidelines
described in this document.
Note
Identifying Slots and Subslots for the SIPs and SPAs
This section describes how to specify the physical locations of a SIP and SPA on the Cisco ASR 1000 Series
Aggregation Services Routers within the command-line interface (CLI) to configure or monitor the devices.
Specifying the Slot Location for a SIP
The Cisco ASR 1000 Series Aggregation Services Routers support different chassis models, each of which
supports a certain number of chassis slots.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 31

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English