Cisco ASR 1000 Series Software Configuration Guide

Distributed Multilink PPP Configuration Example
The following example configures multilink Point-to-Point Protocol encapsulation method for port 0 of the
Serial SPA in subslot 2 of the SIP in slot 1 of the router and sets the IP address and subnet mask:
Router(config)# interface multilink1
Router(config-if)# ip addr 10.0.0.1 255.255.255.0
Router(config)# interface serial3/2/0
Router(config-if)# encapsulation ppp
Router(config-if)# ppp chap hostname X1
Router(config-if)# ppp multilink gr 1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 289
Configuring the 4-Port Serial Interface SPA
Distributed Multilink PPP Configuration Example

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English