Cisco ASR 1000 Series Software Configuration Guide

The following table shows the hardware description that appears in the show command output for each Cisco
WebEx Node SPA that is supported on the Cisco ASR 1000 Series Routers.
Table 35: Cisco WebEx Node SPA Hardware Descriptions in show Commands
Description in show hw-module
subslot Command
Description in show interfaces
Command
SPA
“Service Engine is Cisco
SPA-WMA-K9”
Hardware is SPA-WMA-K9Cisco WebEx Node for ASR 1000
SPA
Example of the show interfaces service-engine Command
The following example shows an output of the show interfaces service-engine command on a Cisco ASR
1000 Series Aggregation Services Router with a Cisco WebEx Node SPA installed in subslot 0 of a SIP that
is installed in slot 0:
Router# show interfaces Service-Engine 0/0/0
Service-Engine0/0/0 is up, line protocol is up
Hardware is SPA-WMA-K9
Example of the show hw-module subslot service-engine status Command
The following example shows an output of the show hw-module subslot service-engine status command
on a Cisco ASR 1000 Series Routers with a Cisco WebEx Node SPA installed in subslot 0 of a SIP that is
installed in slot 0:
Router# show hw-module subslot 0/0 service-engine status
Service Engine is Cisco SPA-WMA-K9
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 351
Overview of the Cisco WebEx Node for the Cisco ASR 1000 Series Routers
Example of the show interfaces service-engine Command

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English