Cisco ASR 1000 Series Software Configuration Guide

•
Use the show ip interface briefcommand to display the virtual CEM interfaces that the router created
to represent master and slave clock interfaces. The output in the following example shows only the
virtual CEM interface. Information for all other interfaces is omitted from the display.
Router# show ip int brief
. . .
Virtual-cem0/1/24 unassigned YES unset up up
. . .
•
Use the show cem circuitcommand to display a list of CEM circuits configured on the SPA. The
command displays both normal and out-of-band clocking CEM circuits.
Router# show cem circuit
CEM Int. ID Line Admin Circuit AC
--------------------------------------------------------------
CEM0/1/0 1 DOWN DOWN Active --/--
Virtual-cem0/1/24 DOWN UP Active UP
•
Use the show cem interface virtual-cem slot/subslot/port command to display information about a
particular virtual CEM interface:
Router# show cem interface virtual-cem 0/1/24
(Virtual-cem0/1/24) State: CONFIG COMPLETE
Virtual CEM Slave Clock Interface
Slot 0, Slot Unit 88, VC -1
Total cem circuits: 1
Cem circuits up : 1
Cem circuits down : 0
•
Use the show run interface virtual-cem slot/subslot/port command to display the current running
configuration pertaining to the specified interface:
Router# show run int virtual-cem 0/1/24
Building configuration...
Current configuration : 117 bytes
!
interface Virtual-cem0/1/24
no ip address
cem 1
xconnect 20.0.0.1 300 encapsulation mpls
!
end
•
Use the show run | begin recovered command to display the recovered clock used for out-of-band
clocking:
Router# show run | begin recovered
recovered-clock 0 1
clock master
•
On the clock slave, you can use the show recovered-clock command to display the status of the
out-of-band clock:
Router# show recovered-clock
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 529
Configuring the Circuit Emulation over Packet Shared Port Adapter
Configuring Out-of-Band Clocking

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English