Cisco FirePOWER ASA 5500 series User Manual

B-13
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
Appendix B Sample Configurations
Example 4: Multiple Mode, Transparent Firewall with Outside Access
Figure B-4 Example 4
See the following sections for the configurations for this scenario:
• Example 4: System Configuration, page B-13
• Example 4: Admin Context Configuration, page B-14
• Example 4: Customer A Context Configuration, page B-15
• Example 4: Customer B Context Configuration, page B-15
• Example 4: Customer C Context Configuration, page B-16
Example 4: System Configuration
You must first enable multiple context mode using the mode multiple command. The mode is not stored
in the configuration file, even though it endures reboots. Enter the show mode command to view the
current mode.
firewall transparent
hostname Farscape
password passw0rd
enable password chr1cht0n
asdm image disk0:/asdm.bin
boot system disk0:/image.bin
admin-context admin
interface gigabitethernet 0/0
10.1. n .2
Internet
customerA
Network 2
inside
10.1.2.3
192.168.2.1
Management host
10.2.1.75
inside insideinside
Admin
Network 2
10.1.1.3
192.168.1.1
customerB
Network 2
10.1.3.3
192.168.3.1
customerC
Network 2
10.1.4.3
192.168.4.1
Admin Context
outside
customerA
outside
customerB
outside
customerC
outside
10.1.1.1 10.1.2.1 10.1.3.1 10.1.4.1
126981

Cisco FirePOWER ASA 5500 series Specifications

General

Brand	Cisco
Model	FirePOWER ASA 5500 series
Category	Firewall
Language	English