Cisco FirePOWER ASA 5500 series User Manual

B-18
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
Appendix B Sample Configurations
Example 6: IPv6 Configuration
ssl trust-point CA-MS inside
Step 8 Finally, configure the email proxy settings.
imap4s
enable outside
enable inside
enable dmz161
default-group-policy DfltGrpPolicy
pop3s
enable outside
enable inside
enable dmz161
default-group-policy DfltGrpPolicy
smtps
enable outside
enable inside
enable dmz161
default-group-policy DfltGrpPolicy
Example 6: IPv6 Configuration
This sample configuration shows several features of IPv6 support on the security appliance:
• Each interface is configured with both IPv6 and IPv4 addresses.
• The IPv6 default route is set with the ipv6 route command.
• An IPv6 access list is applied to the outside interface.
• The enforcement of Modified-EUI64 format interface identifiers in the IPv6 addresses of hosts on
the inside interface.
• The outside interface suppresses router advertisement messages.
• An IPv6 static route.

Cisco FirePOWER ASA 5500 series Specifications

General

Brand	Cisco
Model	FirePOWER ASA 5500 series
Category	Firewall
Language	English