Cisco XR 1200 series User Manual

show event manager policy available
To display Embedded Event Manager (EEM) policies that are available to be registered, use the show event
manager policy available command in EXEC mode.
show event manager policy available [system| user]
Syntax Description
(Optional) Displays all the available system policies.system
(Optional) Displays all the available user policies.user
Command Default
If this command is invoked with no optional keywords, it displays information for all available system and
user policies.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
The show fault manager policy available command was replaced
with the show event manager policy available command.
Release 3.6.0
Task ID was changed from fault-mgr to eem.Release 3.7.0
Usage Guidelines
Use the show event manager policy available command to find out what policies are available to be registered
just prior to using the event manager policy command to register policies.
This command is also useful if you forget the exact name of a policy that is required for the event manager
policy command.
Task ID
OperationsTask ID
readeem
Examples
This is a sample output of the show event manager policy available command:
RP/0/0/CPU0:router# show event manager policy available
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
100 OL-24735-01
Embedded Event Manager Commands
show event manager policy available

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English