Cisco XR 1200 series User Manual

recurring
To indicate that the operation starts automatically at the specified time and for the specified duration every
day, use the recurring command in IP SLA schedule configuration mode. To not start the operation everyday,
use the no form of this command.
recurring
no recurring
Syntax Description
This command has no keywords or arguments.
Command Default
Recurring is disabled.
Command Modes
IP SLA schedule configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the recurring command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)# recurring
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
204 OL-24735-01
IP Service Level Agreement Commands
recurring

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English