EasyManuals Logo
Home>Cisco>Network Router>XR 1200 series

Cisco XR 1200 series User Manual

Cisco XR 1200 series
432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
When a rule is applied (or if a rule set that contains this rule is applied), then the rule definition cannot be
modified through the configuration until the rule or rule set is once again unapplied.
Tip
It is possible to configure apply settings at the same time for both a rule and zero or more rule sets that
contain the rule. In this case, the apply settings for the rule are the union of all the apply configurations.
Tip
The logging correlator apply rule command allows you to enter submode (config-corr-apply-rule) to apply
and activate rules:
RP/0/0/CPU0:router(config)# logging correlator apply rule stateful1
RP/0/0/CPU0:router(config-corr-apply-rule)#?
all-of-router Apply the rule to all of the router
clear Clear the uncommitted configuration
clear Clear the configuration
commit Commit the configuration changes to running
context Apply rule to specified context
describe Describe a command without taking real actions
do Run an exec command
exit Exit from this submode
location Apply rule to specified location
no Negate a command or set its defaults
pwd Commands used to reach current submode
root Exit to the global configuration mode
show Show contents of configuration
RP/0/0/CPU0:router(config-corr-apply-rule)#
While in the submode, you can negate keyword options:
RP/0/0/CPU0:router(config-corr-apply-rule)# no all-of-router
RP/0/0/CPU0:router(config-corr-apply-rule)# no context
RP/0/0/CPU0:router(config-corr-apply-rule)# no location
Task ID
OperationsTask ID
read, writelogging
Examples
This example shows how to apply a predefined correlator rule to a location:
RP/0/0/CPU0:router(config)# logging correlator apply rule rule1
RP/0/0/CPU0:router(config-corr-apply-rule)# location 0/2/CPU0
Related Commands
DescriptionCommand
Defines the rules for correlating messages.logging correlator rule, on page 22
Displays one or more predefined logging correlator
rules.
show logging correlator rule, on page 52
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
16 OL-24735-01
Alarm Management and Logging Correlation Commands
logging correlator apply rule

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco XR 1200 series and is the answer not in the manual?

Cisco XR 1200 series Specifications

General IconGeneral
BrandCisco
ModelXR 1200 series
CategoryNetwork Router
LanguageEnglish

Related product manuals