Cisco XR 1200 series User Manual

ipsla
To enter IP SLA configuration mode and configure IP Service Level Agreements, use the ipsla command in
global configuration mode. To return to the default setting, use the no form of this command.
ipsla
no ipsla
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
The ipsla command enters IP SLA configuration mode where you can configure the various IP service level
agreement options.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to enter IP SLA configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)#
Related Commands
DescriptionCommand
Configures MD5 authentication for IP SLA control
messages.
key-chain, on page 152
Configures a low-water memory mark.low-memory, on page 158
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
150 OL-24735-01
IP Service Level Agreement Commands
ipsla

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English