Cisco XR 1200 series User Manual

reissue-nonbistate
To reissue non-bistate alarm messages (events) from the correlator log after the root-cause alarm of a stateful
rule clears, use the reissue-nonbistate command in stateful or nonstateful correlation rule configuration
modes. To disable the reissue-nonbistate flag, use the no form of this command.
reissue-nonbistate
no reissue-nonbistate
Syntax Description
This command has no keywords or arguments.
Command Default
Non-bistate alarm messages are not reissued after their root-cause alarm clears.
Command Modes
Stateful correlation rule configuration
Nonstateful correlation rule configuration
Command History
ModificationRelease
This command was introduced.Release 3.6.0
Usage Guidelines
By default, when the root-cause alarm of a stateful correlation is cleared, any non-root-cause, bistate messages
being held for that correlation are silently deleted and are not sent to syslog. If the non-bistate messages should
be sent, use the reissue-nonbistate command for the rules where this behavior is required.
Task ID
OperationsTask ID
read, writelogging
Examples
This example shows how to reissue nonbistate alarm messages:
RP/0/0/CPU0:router(config)# logging correlator rule state_rule type stateful
RP/0/0/CPU0:router(config-corr-rule-st)# reissue-nonbistate
Related Commands
DescriptionCommand
Displays messages in the logging correlator buffer.show logging correlator buffer, on page 47
Displays messages in the logging events buffer.show logging events buffer, on page 57
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 41
Alarm Management and Logging Correlation Commands
reissue-nonbistate

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English