Cisco XR 1200 series User Manual

logging facility
To configure the type of syslog facility in which system logging (syslog) messages are sent to syslog servers,
use the logging facility command in global configuration mode. To remove the logging facility command
from the configuration file and disable the logging of messages to any facility type, use the no form of this
command.
logging facility [ type ]
no logging facility
Syntax Description
(Optional) Syslog facility type. The default is local7. Possible values are listed under Table
30: Facility Type Descriptions , on page 322in the “Usage Guidelines” section.
type
Command Default
type: local7
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
This table describes the acceptable options for the type argument.
Table 30: Facility Type Descriptions
DescriptionFacility Type
Authorization systemauth
Cron/at facilitycron
System daemondaemon
Kernelkern
Reserved for locally defined messageslocal0
Reserved for locally defined messageslocal1
Reserved for locally defined messageslocal2
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
322 OL-24735-01
Logging Services Commands
logging facility

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English