Cisco XR 1200 series User Manual

monitor controller sonet
To monitor SONET controller counters, use the monitor controller sonet command in EXEC mode.
monitor controller sonet interface-path-id
Syntax Description
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark ( ? )
online help function.
interface-path-id
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
Use the monitor controller sonet command to display SONET controller counters. The display refreshes
every 2 seconds.
The interactive commands that are available during a controller monitoring session are described in this table.
Table 34: Interactive Commands for the monitor controller sonet Command
DescriptionCommand
Resets controller SONET counters to 0.c
Freezes the display screen, thereby suspending the
display of fresh counters.
f
Thaws the display screen, thereby resuming the
display of fresh counters.
t
Terminates the controller SONET monitoring session.q
Enables you to jump to a nonsequential SONET
controller. You are prompted to enter the
SONETcontroller to be monitored.
s
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
364 OL-24735-01
Performance Management Commands
monitor controller sonet

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English