Cisco XR 1200 series User Manual

tag (IP SLA)
To create a user-specified identifier for an IP SLA operation, use the tag command in the appropriate
configuration mode. To unset the tag string, use the no form of this command.
tag [ text ]
no tag
Syntax Description
(Optional) Specifies a string label for the IP SLA operation.
text
Command Default
No tag string is configured.
Command Modes
IP SLA UDP echo configuration
IP SLA UDP jitter configuration
IP SLA ICMP path-jitter configuration
IP SLA ICMP path-echo configuration
IP SLA ICMP echo configuration
IP SLA MPLS LSP ping configuration
IP SLA MPLS LSP trace configuration
IP SLA MPLS LSP monitor ping configuration
IP SLA MPLS LSP monitor trace configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Support was added for IP SLA MPLS LSP ping and IP SLA MPLS LSP
trace configuration modes.
Release 3.4.0
This command was added to IP SLA MPLS LSP monitor ping and
monitor trace configuration modes.
Release 3.5.0
Usage Guidelines
If the tag command is used in IP SLA operation mode, it configures the user-defined tag string for the specific
operation being configured. If the tag command is used in IP SLA MPLS LSP monitor mode, it configures
the user-defined tag string for all operations associated with the monitored provider edge (PE) routers. This
configuration is inherited by all LSP operations that are created automatically.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 259
IP Service Level Agreement Commands
tag (IP SLA)

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English