Cisco XR 1200 series User Manual

show logging correlator buffer
To display messages in the logging correlator buffer, use the show logging correlator buffer command in
EXEC mode.
show logging correlator buffer {all-in-buffer [ruletype [nonstateful| stateful]]| [rulesource [internal|
user]]| rule-name correlation-rule1 ... correlation-rule14| correlationID correlation-id1 .. correlation-id14}
Syntax Description
Displays all messages in the correlation buffer.all-in-buffer
(Optional) Displays the ruletype filter.ruletype
(Optional) Displays the nonstateful rules.nonstateful
(Optional) Displays the stateful rules.stateful
(Optional) Displays the rulesource filter.rulesource
(Optional) Displays the internally defined rules from the rulesource
filter.
internal
(Optional) Displays the user-defined rules from the rulesource filter.user
Displays a messages associated with a correlation rule name. Up to
14 correlation rules can be specified, separated by a space.
rule-name
correlation-rule1...correlation-rule14
Displays a message identified by correlation ID. Up to 14 correlation
IDs can be specified, separated by a space. Range is 0 to 4294967294.
correlationID
correlation-id1..correlation-id14
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 47
Alarm Management and Logging Correlation Commands
show logging correlator buffer

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English