clear logging events delete
To delete messages from the logging events buffer, use the clear logging events delete command in EXEC
mode.
clear logging events delete
Syntax Description
Deletes only events at the administrative level.admin-level-only
Deletes all event IDs from the logging events buffer.all-in-buffer
Deletes bi-state alarms in the SET state.bistate-alarms-set
Deletes events from a specified category.
category name
Deletes events from a specified context.
context name
Deletes events with an event ID equal to or lower than the event ID specified
with the event-id argument. Range is 0 to 4294967294.
event-hi-limit event-id
Deletes events with an event ID equal to or higher than the event ID specified
with the event-id argument. Range is 0 to 4294967294.
event-lo-limit event-id
Deletes events, beginning with the first event in the logging events buffer. For
the event-count argument, enter the number of events to be deleted.
first event-count
Deletes events from a specified message group.
group message-group
Deletes events, beginning with the last event in the logging events buffer. For
the event-count argument, enter the number of events to be deleted.
last event-count
Deletes messages from the logging events buffer for the specified location.
The node-id argument is entered in the rack/slot/module notation.
location node-id
Deletes events with the specified message code.
message message-code
Deletes events with a severity level equal to or lower than the severity level
specified with the severity argument.
severity-hi-limit
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 7
Alarm Management and Logging Correlation Commands
clear logging events delete
To Next Page
Loading...
Need help?
General
