Cisco XR 1200 series User Manual

show performance-mgmt mpls
To display performance management (PM) data for Multiprotocol Label Switching (MPLS) entity instance
monitoring and statistics collections, use the show performance-mgmt mpls command in EXEC mode.
show performance-mgmt {monitor| statistics} mpls ldp {ip-address| all} {first-sample-id| all-samples|
last-sample}
Syntax Description
Displays the data collected for an entity instance monitoring collection. The
data gathered is from one sample cycle from one instance of an MPLS entity
collection template.
The data is available to be displayed only as the monitor data is
collected.
Note
monitor
Displays the data collected from statistics collection samples.statistics
Displays data from MPLS Label Distribution Protocol (LDP) collections.ldp
IP address of LDP session instance.
ip-address
Displays data from all LDP session instances.
This option is available only with the statistics keyword. It is not
available with the monitor keyword because a entity instance
monitoring collection captures data from an entity instance for one
sampling cycle.
Note
all
Sample ID of the monitoring or statistics collection to be displayed.
first-sample-id
Displays all collected samples.all-samples
Displays the last collected samples.last-sample
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Removed support for MPLS interfaces.Release 3.3.0
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 405
Performance Management Commands
show performance-mgmt mpls

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English