Cisco XR 1200 series User Manual

show ipsla responder statistics ports
To display the number of probes that are received or handled by the currently active ports on the responder,
use the show ipsla responder statistics ports command in EXEC mode.
show ipsla responder statistics ports
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
The output of the show ipsla responder statistics port command is available only for specific intervals of
time in which only nonpermanent ports are being used at the responder. The reason is that the responder closes
the nonpermanent ports after each operation cycle. However, if both permanent and nonpermanent ports are
used, the output always contains rows for the permanent ports. The rows for the nonpermanent ports are
displayed only if those nonpermanent ports are enabled at the instant the command is issued.
Task ID
OperationsTask ID
readmonitor
Examples
The following sample output is from the show ipsla responder statistics port command:
RP/0/0/CPU0:router# show ipsla responder statistics port
Port 12709 Local Address ... NumberOfProbes 2
Port 12213 Local Address ... NumberOfProbes 1
Port 55690 Local Address ... NumberOfProbes 376
This table describes the significant fields shown in the display.
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 233
IP Service Level Agreement Commands
show ipsla responder statistics ports

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English