Cisco XR 1200 series User Manual

show logging onboard
To display the onboard failure logging (OBFL) messages, use the show logging onboard command in
administration EXEC or mode.
show logging onboard [all| cbc {dump-all| dump-range {start-address| end-address}| most-recent {fans
fan-tray-slot| [location node-id]}| diagnostic| environment| error| temperature| uptime| voltage}] [all|
continuous| historical| static-data] [detail| raw| summary] [location node-id] [verbose]
Syntax Description
Displays all file information.all
Displays Can Bus Controller (CBC) OBFL commands.cbc
Displays all OBFL records.dump-all
Displays OBFL EEPROM data for a given range. Start and end address
ranges are from 0 to 4294967295.
dump-range {start-address |
end-address}
Displays the last five OBFL data records.most-recent
Displays a specific fan tray slot.
fans fan-tray-slot
Displays OBFL messages from the designated node. The node-id
argument is entered in the rack/slot/module notation.
location node-id
Displays diagnostic information.diagnostic
Displays system environment information.environment
Displays output from the message application.error
Displays temperature information.temperature
Displays the OBFL uptime.uptime
Displays voltage information.voltage
Displays continuous information.continuous
Displays historical information.historical
Display system descriptor data.static-data
Displays detailed logging information.detail
Displays raw OBFL data.raw
Displays a summary of OBFL logging information.summary
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
358 OL-24735-01
Onboard Failure Logging Commands
show logging onboard

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English