Cisco XR 1200 series User Manual

show event manager refresh-time
To display the time between the user authentication refreshes in the Embedded Event Manager (EEM), use
the show event manager refresh-time command in EXEC mode.
show event manager refresh-time
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
The show fault manager refresh-time command was replaced with
the show event manager refresh-time command.
Release 3.6.0
Task ID was changed from fault-mgr to eem.Release 3.7.0
Usage Guidelines
The output of the show event manager refresh-time command is the refresh time, in seconds.
Task ID
OperationsTask ID
readeem
Examples
This is a sample output of the show event manager refresh-time command:
RP/0/0/CPU0:router# show event manager refresh-time
Output:
1800 seconds
Related Commands
DescriptionCommand
Specifies the time between the system attempts to
contact the AAA server, and refreshes the username
reauthentication.
event manager refresh-time, on page 85
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 105
Embedded Event Manager Commands
show event manager refresh-time

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English