Cisco XR 1200 series User Manual

clear logging events reset
To reset bi-state alarms, use the clear logging events reset command in EXEC mode.
clear logging events reset {all-in-buffer| event-id}
Syntax Description
Resets all bi-state alarm messages in the event logging buffer.all-in-buffer
Event ID. Resets the bi-state alarm for an event or events. Up to 32 event IDs
can be specified, separated by a space. Range is 0 to 4294967294.
event-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
This command clears bi-state alarms messages from the logging events buffer. Bi-state alarms are generated
by state changes associated with system hardware, such as a change of interface state from active to inactive,
or the online insertion and removal (OIR) of a Modular Service Card (MSC), or a change in component
temperature.
Use the show logging events buffer, on page 57 command to display messages in the logging events buffer.
Task ID
OperationsTask ID
executelogging
Examples
This example shows how to reset all bi-alarms in the logging events buffer:
RP/0/0/CPU0:router# clear logging events reset all-in-buffer
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 11
Alarm Management and Logging Correlation Commands
clear logging events reset

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English