Cisco XR 1200 series User Manual

schedule monitor
To schedule MPLS LSP monitoring instances, use the schedule monitor command in IP SLA LSP monitor
configuration mode. To unschedule the monitoring instances, use the no form of this command.
schedule monitor monitor-id
no schedule monitor [ monitor-id ]
Syntax Description
Number of the monitoring instance to schedule. Range is 1 to 2048.
monitor-id
Command Default
No schedule is configured.
Command Modes
IP SLA MPLS LSP monitor configuration
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Usage Guidelines
The schedule monitor command enters IP SLA MPLS LSP monitor schedule configuration mode so that
you can set the desired schedule parameters for the MPLS LSP monitor instance. This schedules the running
of all operations created for the specified monitor instance.
To remove all configured schedulers, use the no schedule monitor command with no monitor-id argument.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to access and use the schedule monitor command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# schedule monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-sched)#
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 213
IP Service Level Agreement Commands
schedule monitor

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English