Cisco XR 1200 series User Manual

show logging
To display the contents of the logging buffer, use the show logging command in EXEC mode.
show logging [local location node-id| [location node-id] [start month day hh : mm : ss] [process name]
[string string] [end month day hh : mm :ss]]
Syntax Description
(Optional) Displays syslog messages with a time
stamp equal to or lower than the time stamp specified
with the monthday hh : mm : ss argument.
The ranges for the month day hh : mm : ss arguments
are as follows:
• month—The month of the year. The values for
the month argument are:
◦
january
◦
february
◦
march
◦
april
◦
may
◦
june
◦
july
◦
august
◦
september
◦
october
◦
november
◦
december
• day—Day of the month. Range is 01 to 31.
• hh :—Hours. Range is 00 to 23. You must insert
a colon after the hh argument.
• mm :—Minutes. Range is 00 to 59. You must
insert a colon after the mm argument.
• ss—Seconds. Range is 00 to 59.
end month day hh : mm : ss
(Optional) Displays system logging (syslog) messages
from the specified local buffer. The node-id argument
is entered in the rack/slot/modul e notation.
local location node-id
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
344 OL-24735-01
Logging Services Commands
show logging

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English