Cisco XR 1200 series User Manual

show snmp correlator rule
To display defined SNMP correlation rules, use the show snmp correlator rule command in EXEC mode.
show snmp correlator rule [all| rule-name]
Syntax Description
Displays all rule sets.all
Specifies the name of a rule. Up to 14 predefined SNMP correlation rules can be
specified, separated by a space.
rule-name
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
Task ID
OperationTask ID
readsnmp
Examples
This sample shows an output from the show snmp correlator rule command:
RP/0/0/CPU0:router# show snmp correlator rule rule_1
Rule Name : rule_1
Time out : 888 Rule State: RULE_APPLIED_ALL
Root: OID : 1.3.6.1.2.1.11.0.2
vbind : 1.3.6.1.2.1.2.2.1.2 value /3\.3\.\d{1,3}\.\d{1,3}/
vbind : 1.3.6.1.2.1.5.8.3 index val
Nonroot: OID : 1.3.6.1.2.1.11.3.3
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 69
Alarm Management and Logging Correlation Commands
show snmp correlator rule

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English