Cisco XR 1200 series User Manual

logging suppress rule
To create a logging suppression rule and enter the configuration mode for the rule, use the logging suppress
rule command in the global configuration mode. To remove a logging suppression rule, use the no form of
this command.
logging suppress rule rule-name [alarm msg-category group-name msg-code| all-alarms]
no logging suppress rule rule-name
Syntax Description
Name of the rule.
rule-name
(Optional) Specifies a type of alarm to be suppressed by the logging
suppression rule.
alarm
Message category of the root message.
msg-category
Group name of the root message.
group-name
Message code of the root message.
msg-code
(Optional) Specifies that the logging suppression rule suppresses all types
of alarms.
all-alarms
Command Default
No logging suppression rules exist by default.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
If you use the logging suppress rule command without specifying a non-root-cause alarm, you can do so
afterwards, by entering the alarm keyword at the prompt.
Task ID
OperationsTask ID
read, writelogging
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 37
Alarm Management and Logging Correlation Commands
logging suppress rule

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English