Cisco XR 1200 series User Manual

show logging correlator ruleset
To display defined correlation rule set names, use the show logging correlator ruleset command in EXEC
mode.
show logging correlator ruleset {all| correlation-ruleset1 ... correlation-ruleset14} [detail| summary]
Syntax Description
Displays all rule set names.all
Rule set name to be displayed. Up to 14 predefined rule set names can
be specified, separated by a space.
correlation-rule1...correlation-rule14
(Optional) Displays detailed information.detail
(Optional) Displays the summary information.summary
Command Default
Detail is the default, if nothing is specified.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.6.0
Usage Guidelines
If the ruletype is not specified, then both stateful and nonstateful rules are displayed as the default.
If the rulesource is not specified, then both user and internally defined rules are displayed as the default.
If the summary or detail options are not specified, then detailed information is displayed as the default.
Task ID
OperationsTask ID
readlogging
Examples
This is the sample output from the show logging correlator ruleset command:
RP/0/0/CPU0:router# show logging correlator RuleSetOne RuleSetTwo
Rule Set Name : RuleSetOne
Rules: Rule1 : Applied
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 55
Alarm Management and Logging Correlation Commands
show logging correlator ruleset

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English