Cisco XR 1200 series User Manual

show snmp correlator buffer
To display messages in SNMP correlator buffer, use the show snmp correlator buffer in EXEC mode.
show snmp correlator buffer [all| correlation ID | rule-name name]
Syntax Description
Displays all messages in the correlator buffer.all
Displays a message identified by correlation ID. Range is 0 to 4294967294. Up
to 14 correlation rules can be specified, separated by a space.
correlation id
Displays a messages associated with a SNMP correlation rule name. Up to
14 correlation rules can be specified, separated by a space.
rule-name name
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.8.0
Usage Guidelines
Task ID
OperationTask ID
readsnmp
Examples
The sample shows an output from the show snmp correlator buffer command:
RP/0/0/CPU0:router# show snmp correlator buffer correlationID 10
Correlation ID : 10
Rule : ospf-trap-rule
Rootcause: 1.3.6.1.6.3.1.1.5.3
Time : Dec 14 02:32:05
Varbind(s):
ifIndex.17 = 17
ifDescr.17 = POS0/7/0/0
ifType.17 = other(1)
cieIfStateChangeReason.17 = down
Nonroot : 1.3.6.1.2.1.14.16.2.2
Time: Dec 14 02:32:04
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
66 OL-24735-01
Alarm Management and Logging Correlation Commands
show snmp correlator buffer

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English