Cisco XR 1200 series User Manual

ModificationRelease
Support was added for IP SLA MPLS LSP ping configuration mode.Release 3.4.0
This command was added to IP SLA MPLS LSP monitor ping
configuration mode.
Release 3.5.0
Usage Guidelines
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the datasize request command in IP SLA UDP jitter configuration
mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type udp jitter
RP/0/0/CPU0:router(config-ipsla-udp-jitter)# datasize request 512
Related Commands
DescriptionCommand
Configures MPLS label switched path (LSP)
monitoring.
mpls lsp-monitor, on page 172
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Configures an IP SLA ICMP echo operation.type icmp echo, on page 283
Configures an IP SLA ICMP path-echo operation.type icmp path-echo, on page 284
Configures an IP SLA ICMP path-jitter operation.type icmp path-jitter, on page 285
Tests connectivity in an LSP path in an MPLS VPN.type mpls lsp ping, on page 286
Configures an IP SLA UDP echo operation.type udp echo, on page 290
Configures an IP SLA UDP jitter operation.type udp jitter, on page 291
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 129
IP Service Level Agreement Commands
datasize request

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English