Cisco XR 1200 series User Manual

Examples
The following example shows how to use the output interface command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# operation 1
RP/0/0/CPU0:router(config-ipsla-op)# type mpls ls output interface pos 0/1/0/0
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Configures the next-hop address to be used for LSP
ping or LSP trace operations.
output nexthop, on page 177
Schedules an IP SLA operation.schedule operation, on page 215
Tests connectivity in an LSP path in an MPLS VPN.type mpls lsp ping, on page 286
Traces the hop-by-hop route of an LSP path in an
MPLS VPN.
type mpls lsp trace, on page 288
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
176 OL-24735-01
IP Service Level Agreement Commands
output interface

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English