Usage Guidelines
If the start-time command is used in IP SLA operation mode, it configures the start time for the specific
operation being configured. If the start-time command is used in IP SLA MPLS LSP monitor mode, it
configures the start time for all monitor instances associated with the monitored provider edge (PE) routers.
Task ID
OperationsTask ID
read, writemonitor
Examples
The following example shows how to use the start-time command option for the schedule operation:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# schedule operation 1
RP/0/0/CPU0:router(config-ipsla-sched)# start-time after 01:00:00
The following example shows how to use the start-time command in IP SLA MPLS LSP monitor schedule
configuration mode:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# mpls lsp-monitor
RP/0/0/CPU0:router(config-ipsla-mplslm)# schedule monitor 1
RP/0/0/CPU0:router(config-ipsla-mplslm-sched)# start-time after 01:00:00
The following example shows how to use the start-time command and specify a year for a scheduled operation:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla operation 2
RP/0/0/CPU0:router(config-ipsla-op)# type icmp echo
RP/0/0/CPU0:router(config-ipsla-icmp-echo)# destination address 192.0.2.9
RP/0/0/CPU0:router(config-ipsla-icmp-echo)# exit
RP/0/0/CPU0:router(config-ipsla-op)# exit
RP/0/0/CPU0:router(config-ipsla)# schedule operation 2
RP/0/0/CPU0:router(config-ipsla-sched)# start 20:0:0 february 7 2008
RP/0/0/CPU0:router(config-ipsla-sched)#
Related Commands
DescriptionCommand
Specifies the length of time to execute.life, on page 154
Configures an IP SLA operation.operation, on page 174
Indicates that the operation starts automatically at the
specified time and for the specified duration every
day.
recurring, on page 204
Schedules an IP SLA MPLS LSP monitoring instance.schedule monitor, on page 213
Schedules an IP SLA operation.schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
254 OL-24735-01
IP Service Level Agreement Commands
start-time