Cisco XR 1200 series User Manual

The following example shows how to set the lower-limit and upper-limit values for the react command with
the packet-loss keyword for the threshold command:
RP/0/0/CPU0:router# configure
RP/0/0/CPU0:router(config)# ipsla
RP/0/0/CPU0:router(config-ipsla)# reaction operation 432
RP/0/0/CPU0:router(config-ipsla-react)# react packet-loss dest-to-source
RP/0/0/CPU0:router(config-ipsla-react-cond)# threshold lower-limit 8000 upper-limit 10000
Related Commands
DescriptionCommand
Configures an IP SLA operation.operation, on page 174
Schedules an IP SLA operation.schedule operation, on page 215
Configures certain actions that are based on events
under the control of the IP SLA agent.
reaction operation, on page 199
Specifies an element to be monitored for a reaction.react, on page 192
Takes action on average values to violate a threshold.threshold type average, on page 269
Takes action after a number of consecutive violations.threshold type consecutive, on page 271
Takes action immediately upon a threshold violation.threshold type immediate, on page 273
Takes action upon X violations in Y probe operations.threshold type xofy, on page 275
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
268 OL-24735-01
IP Service Level Agreement Commands
threshold

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English